Synerflow Perchloric Acid Fume Hoods


The Gelman Synerflow Perchloric Acid Fume Hoods are designed to provide a high degree of personnel and environment protection for procedures involving the use of concentrated perchloric acid in the laboratory.
Embodying advanced system-monitoring and controls technology, excellent aerodynamic designs, enhanced airflows, ergonomics and styling, Gelman Synerflow Perchloric Acid Fume Hoods are manufactured to the most exacting standards for safety and containment.
Each fume hood is constructed of a seamless, corrosion-resistant Type 316 stainless steel interior with an integral work surface, drainage trough and a built-in washdown system.

The Gelman Synerflow Perchloric Acid Fume Hoods maintain an average face velocity of
0.5 m/s through the work access opening.
An effective air barrier between the operator and the work chamber, maintained by an inward flow of room air into a full-width work access opening provides personnel and environment protection.
The barrier air blends with the perchloric mist and vapours released within the work chamber and is totally exhausted to the outside atmosphere via a dedicated facility exhaust system.
All Synerflow Perchloric Acid Fume Hoods are fitted with a standard by-pass system which minimizes fluctuations in face velocity as the sash is raised or lowered. The by-pass is designed so that as the sash is fully raised, it is completely sealed off to provide optimum extraction through the sash opening for maximum containment. As the sash is closed, the air entering the fume hood through the sash and by-pass openings is redistributed, eliminating high velocity air streams in the near closed sash position.


Microprocessor-controlled diagnostic system with digital display & audible alarm




Gelman Synerflow Perchioric Acid Fume Hoods are manufactured under a rigorous Total Quality Management in full compliance with ISO 9001:2015 and conform with the performance requirement of ASHRAE 110-1995.